Product Introduction:
The cleaning process of the through shot blasting cleaning machine is carried out by a variable speed conveyor roller, which sends steel structural components or steel into the spraying area inside the cleaning machine chamber. The surrounding surfaces are subjected to strong and dense projectile strikes and friction from different coordinate directions, causing the oxide scale, rust layer, and dirt on them to quickly fall off. The steel surface obtains a certain roughness and smoothness, and the workpieces are loaded and unloaded on the inlet and outlet roller conveyors on both sides of the cleaning room. The pellets and rust dust that fall onto the steel are blown by the blowing device. The mixture of scattered pellets and dust is transported by the recovery screw to the chamber funnel, collected by the longitudinal and transverse screw conveyors at the lower part of the elevator, and then lifted to the separator at the upper part of the machine. The separated pure pellets fall into the hopper of the separator and are used for shot blasting cycle. Dust is generated during shot blasting and is sent to the dust removal system through the exhaust duct. The purified air is discharged into the atmosphere, and the particulate dust is captured and collected.

Scope of application:
Suitable for stress relief and surface rust removal in metal structure weldments, steel products, railway vehicles, engineering machinery, and bridge manufacturing industries.

About us

Customer services

Sell on waimao.163.com